PERPETUAL ENGINES
how to build
VERY SIMPLE SERIES ENGINES THAT YOU CAN DO AT HOME
TO WHICH HE CALLED THEM FOOLS ENGINES
HASI WHY ARE NOT BUT WHY IS HUMANITY BY TOO SILLY
LEFT TO CHEAT ENGINE WITH ENERGY POLLUTANTS BY TRADE So let's give
FINAL POINT TO THIS NIGHTMARE.
START BY UNDERSTANDING THE BASICS OF ENERGY
LAWS AUTON
The AUTON laws are the laws that govern all systems or mechanisms
auto lift motion or energy, a high multiplier factor performance level sufficient to obtain free energy for constructive work.
BASES ARE LAWS AUTON;
1. AUTON law states that wherever there is a multiplier increased power
You can create an intelligent mechanism that auto-continue.
2. In some planes of matter or mechanisms AUTON law states the requirement to par, over a parallel factor condensation or continuity of energy or inertial motion.
3. Anything that can exert a force and return to its original position without deterioration can be used to generate an autonomous and perennial mechanism functioning without difficulty.
4. Therefore any energy or force exerted manifested in any direction action can be used by the AUTON intelligence to create movement or transformed into other types of energy.
5. Not that there are laws that allow or not allow, but because human intelligence is above all laws, and to which I have called laws AUTON.
6. To operate any system or facility with the principles of AUTON laws and systems in order to achieve the autonomous perpetuity of physical or electrical-energy mechanical movement, only the super intelligent design is required and well calculated bases in mathematics the laws of physics, either of the target material and the abstract quantum.
7. AUTON human intelligence can create movement or extract energy from any plane of manifestation either electronic, chemical as in the pure energy in the hydraulics, mechanics, and even in strength and power of nothingness or emptiness called ether, and transform it into any class or type of energy, moving or static, using knowledge of the laws of matter, applying geometric and algebraic systems or mechanisms that allow projections.
8. AUTON law is in short intelligible capacity of the human right through the understanding of all laws governing the matter, in all levels, to achieve create interactive systems using an intrinsically relativity.
9. Those who cultivate and develop this superior quality intelligible, is entering the dawn of knowledge of AUTON law, which dictates that no impossible for the supreme intelligence of man.
10. No one AUTON law dictates that the design calculations mechanisms or systems must conform to the minimum initial effort to obtain it right through a consequential maximum power and performance.
11. The system of generators AUTON systems in descending order are in 1st Prime hydraulic-mechanical, mechanical 2nd, 3rd Electrical, Chemical 4th, 5th The heteros; these currently still not very well developed, could exceed the hydraulic at any time, at the moment when researchers discovered the secret of the sun, from hydrogen, helium and ether, micro soles can build almost infinite energy AUTON , very small sizes and perennial energy, whose source could generate a high electrical power, and we could say that a dwarf sun micro sized ping pong, may provide ample power for one or more homes for thousands of years .
12. THE LAW AUTON that studies the origin of life from its origin goes far beyond simple maquinitas perpetual motion AUTON stands for AUTO, automatic, automation, ON ignition on, running, means self on, or is it; works only with its own energy. And it is quite obvious that the whole universe is pure energy and self-sourcing work effectively himself perpetually in an infinite and eternal perpetuity.
13. In plants of the plant kingdom is manifested energy AUTON and they are essential manifestation of this biological energy that prints seal the universe, such as; terrarium which is a small well sterilized in a hermetically sealed glass jar garden, note that you can live without uncovering centuries since plants generate their own self-sustaining.
14. THE SUN other perpetual machine father LAWS AUTON clearly demonstrates the full light as this atomic biological entity generates immeasurable energy, almost infinite, is here in this energy system that the secrets of the mysteries of energy AUTON, enclose challenge scientists to conduct a mathematical explanation of the sun works, and manufacture a micro sun in their laboratories have hydrogen helium size of a pin to generate electricity for an entire country. Quite possibly crashing into the sun because there is something that is not yet known which is the spiritual energy AUTON.
15. If you come to discover this alloy gases that emit light and energy could produce hydrogen with helium I perpetual fluorescent lamps provide light well, would be a powerful electrical generator. So with a single fluorescent size 40 watts would give its light, but about 10-20 kwa hour, over 500 thousand or several million years. With a single fluorescent we could maintain a home perfectly and another could feed our aero-engine amphibious vehicle with neodymium aluminum rotors and stators.
16. Any system or mechanism that is manufactured or constructed using AUTON laws should be exclusively for wellness, healing and multiplication of good, for good, for the good and to establish good towards the surrounding nature, which conceals us entirely in his mantle and could say that it is our real life mother, and logic and sensitivity must be very present in our consciousness everything that she is concerned, we automatically influences and affects ourselves with all living beings who have joined us,
17. GROSS OR THERE ANY OBJECTION TO OPPOSE ANY ABOUT IT? That is why we must understand the law or eco flay ball back, ie; if you were in the middle of a solid and yell sphere, multiplying the acoustic reflex traveling 300 meters per second, returning to its center is multiplied to such an extent that it could at least break your eardrum but chances are it could explode your whole body disintegrating it like a bomb. Likewise, the nature, the world and the universe are spherical and what nobody knows is that whatever you do to your nature, will be returned multiplicadoramente by thousands of times its originator no one can stop him. This knowledge of the concrete reality of actual law is called consciousness.
18. And this knowledge of reality creation of the universe derives from the word meaning ECOLOGY; be fully aware that whatever we do to nature we are doing in OUR OWN AGAINST MULTIPLIED MIND, ie the echo bounce everything we do, we will be returned refracted mind, this grand lodge of the spherical cosmos going well mathematically infallibly its center of origin.
19. For this GREAT CONSCIOUSNESS true reality, we are bound to love, respect, care and generate maximum harmony for the good, for the good and above all for our own good.
Therefore all our efforts and work action should arrogate 100% improvement in the lives of all levels and beings that surround us and shape our planetary ecosystem environment life.
I argue that this knowledge of the interacting forces of universal tilting ECOBIOS are vital part of knowledge of the laws that form the AUTON law.
REFLECTIVE QUESTIONNAIRE ON INERTIAL FORCES AUTON
If we have a lever with a fulcrum that gives us a gain factor of 100, 1,000, 10,000 and 1,000,000 will have a multiplier of power and energy.
If we have a bounded lever enough so that with one kilo, to raise one million kilos, have a gain factor of 1-1 million logically in serious sum equivalent to one thousand tons elevated just one kilo.
Dear reader and spectator who have enough intelligence to create a mechanism to use only 100 kilos of tons that have been raised right through this mechanism, to further raise only 1 kilo of the end of the lever 10 times higher than that I was used to raise tons?
THIS IS IT POSSIBLE?
It is not only possible to do, but with only 2 kilos could raise one kilo more than 10 kilometers.
1º exercise
1. Dear reader this questionnaire is an exercise to wake your sleeping mind, this reflective first I'm going to give as a gift for you to solve, you have 365 days after you've read it so you use your imagination and intelligence capacity and expertise to create this simple mechanism and that you can design loosely, if you can solve it which is very simple, fa, post on youtube and write me at my email.
2. For practical reasons using model 100-1 for you to do tests and conjecture since 1 million to 1 you would be very difficult to do.
3. For me this was a super silly that I met when she was only nine years, so please apply with all your knowledge of physics and quantum mathematics all your mind, that you solve this exercise, this elementary first line questionnaire knowledge of energy AUTON, I hope that the thickness of the cerebral cortex of all the most intelligent beings in the world, may have the answer someday, before passing 365 days. But the weakest could pull the gloves blaspheming; "This Is An Impossible There are laws that prevent" and I can support them in that really are right, that if there are such laws prevented, and they really are concrete and cement rocks harder, and that these are called scientifically raised to the tenth power imbecility.
It is very curious that these simple knowledge is a blind spot for the eyes and minds of almost the vast majority of humanity.
4. The next step is to make a mechanism tirelessly repeat the double action up and down this same process.
5. This is the simplest thing can give as examples to dust, exercise and expand the royal mind, so you can have access to knowledge of perpetual motion AUTON and wonderful inexhaustible source of infinite energy ..
6. If anyone believes this is an unsolvable, is not that there are laws that prevent it and this will sit passively for doing nothing, but their brains do not give more and prefer to remain seated in Stripe starting an Olympic race, with the pretext that there are laws that prevent you from moving your legs and they are so powerful inertia calls not let up or where they are. And the world is full of many fools who share the same weakness.
7. There are no laws preventing anything but lazy minds idiots who do not have the ability to use higher intelligence to uncover the secrets of it.
1. I would argue that nowhere is it written that there are laws that allow flying to 500 tonnes into the air carrying 500 passengers from one country to another with everything and bags without realizing that go at high speed, perhaps reading or watching a movie.
2. Nowhere are no laws that allow such madness, by law this is not possible. Actually nothing is possible until the will and human intelligence involved with his intelligence to challenge the unheard.
3. And who can imagine a rocket weighing 10 times longer than a Boeing 747 can be raised directly and reach 9000 kilometers per hour, OR THAT THE APOLLO 14 weighed about seven thousand tons, which is about the weight of 3100 ford trucks rising skyward to in 10 minutes to orbit in the stratosphere 180 kilometers from the earth, and be circling the planet by terrestrial magnetism this is really impossible for human intelligence but no limits and this I mean the concept of AUTON laws.
4. There seems pretty silly that has conquered the moon, orbiting satellites are put supercomputers have been achieved and no one has had the intelligence to make a mechanical or small motor magnets operate without external energy, or are either fools really or actually mafias fuel disappear all who discover POWER engines or mechanisms that do not require fuels?
5. Whatever the cause must break these dominations of delay that do not allow humanity's freedom from the yoke of slavery to suicidal auto pollution.
6. That is what characterizes the human spirit backwardness regarding their knowledge of the subject, that does not appreciate and care for the life of the beings that surround those considered inferior but that really is totally alrevez as only the plants are far superior to humans in that they are they manufactured oxygen and them is that we must live by their lives that simple. These beings so full of peace and meditative who have given us the opportunity to be alive and breathing, there should revere and love and care as our own parents consequential life.
7. We should live among the blessed by the wonderful properties of trees and forest plants. And if it was not for them any car or plane officer at all and most of all mosses which produce huge amounts of oxygen, it says that a square meter of this produces nearly the equivalent of 27 hectares of trees in a forest, so sacred is this small plant that man considered a useless parasite.
8. So who destroys this plant should colgársele or at least electrocute.
9. If the human brain were well would manufacture cars and machines that clean up and purify the air and simultaneously produce vast amounts of oxygen, this would be the right way forward technology and an intelligent humanity and especially wise, so is that they have proliferated so horrible diseases are on the rise every day, for fear oxygen consumption since the lack of this element makes people, animals and plants sick of horrific way.
10. Now the aristocracy has become fashionable to get into a hyperbaric chamber to feel the immense happiness and health that provides the proper amount of oxygen should be healthy and normal air, the disease is now dictated by doctors sir you no oxygen in the brain, but do not tell you why? Know dear reader that cars and aircraft industries turbines consume much more oxygen than land with its forests can produce.
But this of hyperbaric therapy is only for the rich who can enjoy the wonders of oxygen, only people who lived before this crazy industrial growth engines can tell the happiness of those days when the air had the correct oxygen.
11. Thou must be a guardian and a labor of wisdom and fight for air rescue health before any other purpose, consciousness should all build a separator hydrolysis of obtaining hydrogen oxygen water well, which could be used as cooking fuel and oxygen produced in this way.
12. And try not to use cleaner vehicles and electrical or find another method of perpetual operation.
13. If millions of families make this a healthy planet would become powerful and magically disappear all that lot of strange diseases that are attacking humanity, as well as all beings and plants on the planet.
14. The responsibility of the world is not yours or mine but all in unison.
Many years ago, Professor T. M. It das Agriculture University of Calcutta, India, suggested in a collection, a good sized tree that lives 50 years, usually provides the community services valued at approximately $ 196,250, discriminated as follows:
Oxygen $ 31,250 *
* $ 31,250 in controlling soil erosion, adding fertility
* $ 62,500 in air pollution control
* $ 37,500 in recycling water and humidity control
* $ 31,000 in protection for animals and birds
* $ 2,500 protein; Other values include flowers and fruits.
In the opposite phase, the tree cut down and sold commercially provides less than 0.3% of its actual value.
2
3
4
5
DESCRIPTION OF THIS SIMPLE MOTOR ULTRA LIGHT
OF CENTRAL SPRING
FOR TOYS- airplanes helicopters Vehicles--BOATS.
This is an interesting engine because it works by a torsion spring that is located in the center of the shaft, can be manufactured so that it would be extremely light.
Turning the short end of the spring is hooked by a wedge located at one end of the shaft, attached to the shaft, turns around and released by a ramp that desatora being hooked on the base that holds the rotor, then about four degrees arc below the long end of the spring is near the rotor is stopped by a wedge at the base engine is immediately passed through a retractable wedge fixed on the perimeter of the rotor and another followed which is also a wedge but fixed desatora it, being hooked on the retractable chock spring pressure that unscrews as it was previously pressed, thereby to untwist the spring gives a high speed rotation by one full turn driving the rotor periphery.
Thereafter the cycle repeats itself, so that the rotor on its shaft center takes a turn tighten the spring, and then the other end then untwisted by the spring during a full turn at high speed driving rotor perimeter thus increasing its speed every time he takes a turn.
In short the first full turn tightens the spring in the steering wheel hub, and the second full rotation spring pushing the rotor around the periphery of the wheel is untwisted.
Interestingly super of this engine is that it is an engine for a while, not even 2 times, but the most interesting part is that the spring is compressed with a wedge fully glued to the shaft, which can put tremendous pressure without practically not affect the rotation speed of the wheel, or be completely undetectable power used to compress the spring, and when the spring is followed untwisted, exerts tremendous force on the periphery of the wheel.
This very simple engine also can lead to large scales to move whatever.
In the drawings can be seen the details of the wedges and stops in front and side view and spring, to understand how the mechanism, which is quite simple.
The large central wheel rotates four times to get a ride to gear which activates the loads of the springs, which is triggered twice ie 2 times in a round; which gives a pulse for every 2 turns of the largest wheel making it a 4-stroke engine.
This engine configuration can move trucks, tractors, big cars, buses etc ..
Without any combustontuples or energestupidos,,, hahaha.
The peripherials flyers are activated right through plans that are powered by springs when expanded gears, so the gears of the perimeter flyers contact planes are raches, this allows to get in permanent rotation without stop while the springs are reloaded.
7
7th YEAR
We will manufacture a very simple and effective motor magnets that anyone can build, which offers effective power of real work, here's judice revealed that even an applied child can understand the principles and simultaneously build a home motor with a little work and dedication of course with due care.
TRISTEMENTE EXPERIMENTS IN AN INFINITE INTERNET MAGNET MOTORS ARE VERY VAGUE AND FAILED ATTEMPTS, REALLY HAVE NO PRACTICAL APPLICATION AND THAT RATHER LOSE TIME TO MAKE SERIOUS RESEARCHERS THAN MANY OF THEM ARE JUST JOKES FOR mock the people gullible.
I thank you for the story that (there are laws that prevent perpetual motion) this is the farce and biggest lie that sell large OFFENDERS AGAINST HUMANITY AND AGAINST NATURE WHICH necromancers MANIACOS fuel and gangsters of energy can not eat SPREAD AND HAVING THEIR HEARTS filled oIL, AND THEIR bRAINS ARE NOT SAY.
I WANT TO SAY THAT THIS IS TOTAL, ABSOLUTELY, ENTIRELY UNCERTAIN AND COMPLETELY FALSE, UNDERSTAND THAT THIS IS A TOTAL LIE kilometer SHAM THEATRE DISTRICT ARISTROCATICO.
GOOD BEHOLD THE PLOT AND EXPLAIN THE PRINCIPLES LES.
I'll give you two very practical schemes, one easier to run and another more elaborate, the former is easier but may have lost frictional force, while the latter overcomes this problem.
THE TECNUS 5 This is the technology of electronic valves ahead for the switched magnetic field described here losMICROHIONICOS structure.
Advancing the study of the properties of the crystals is based on the technology world. Since it is the origin of the development of intelligent electronics and the foundation for future large civilizations.
The crystals are silica and they can be treated with special metals and electronic conductivity properties acquired controlled toggling can flows of ions and electrons with high power microscopic loads almost imperceptible.
In our case microhiónicas baths networks are structures; steel, sackcloth, titanium and gold, which function as a PNP network arranged in layers with intermediate oxide which function as mediators between the semiconductor controllers. All developed on a sheet of grade 316 stainless steel 0.2 mm thick which is intermediate between the rotor magnets and the stator.
Actually this is the impersonation of grillets of persiann who have the same action as them, but the big difference is performance, since these can be optimized up to 100% of the total use of magnetic capacity as field block magnetic is as strong as the use of a plate mumetal half inch.
The magnetic control unit has an input and an output connection which with a very small load varies few millivolts molecular structure and properties of metal which is attached to making it a diamagnetic millionths of a second piece from being amagnetic metal diamagnetic to frequency ratio controlled by the rotation of the motor in question and may vary switching permutations according rpm programmed by an electronic circuit Annex control, which in turn is fed by the loading of a these type of generator permanent magnet motors brings incorporated by the new technology.
If you can incorporate into 12v- generator 24v - 48v- live 120v ac voltage and as a bonus, the new ultra compact system that does not detract engine power at all and are shorted outputs generator is not interfere with the power or engine speed.
Unlike other generators with the least load a retrospective inertia is created.
The new microhiónico system has the great advantage to make the 100% the magnetic power of engine performance, unlike TECNUS 1 loses up to 35% of its total capacity, representing a 65% profit maximum, this is due to features of your system, TECNUS 3 has an efficiency of up to 80% but the others do not yield more than 50%.
BUT WHILE NOT HAVE THESE ITEMS ARE AVAILABLE TECHNOLOGIES AND HAND. THEN LET'S USE OF WHAT THERE IS EVERYWHERE AND COMMON.
SO LET'S CONCRETE focus on what PALPABLE accequible.
The reed valves are going to use, I recommend the galvanized iron have greater durability and resistance to corrosion.
The application of the valves of the way in which we are using in this engine I am teaching here, you must meet two characteristics one to attract the rotor magnet in its first phase, and the other is to block the repulsion between the 2 when these magnets are faced to each other.
Well here's the whole secret of valves for these magnetic motors can function optimally.
REALLY EVERYTHING IS FOCUSED ON ACHIEVING A VALVE CALIBRATED MAGNETICALLY.
This theme have to chew and digest much fine if you want to succeed magnetic motors built without using energy or fuels.
We can imagine an example, to help us to facilitate understanding of the issue that we will try, and our imagination help us clearly understand the mechanics of magnetism, how is it actually look? with that of ¿metering valve magnetically ?.
Well imagine you have a mechanical balance of ancient and drawing of lawyers and you have to make placing a weight evenly distributed on both sides to achieve and maintain a level so that the indicator to zero.
Good likewise our valve for use in your model must be calibrated depending on the type of magnets us to go to use in the engine you are making, having the correct results.
Which vary depending on the power, size, power, concentration and form thereof that have, so we need to calibrate the valves for our particular purpose.
Industrial magnets now famous powerful neodymium while having the same shapes weights and identical appearances can be varied power factors, which are expressed in gauss, usually they come allocated power numbers Magnetic its ability anisotropic as N35, N38 , N42y the N 52 the latter which is the code assigned to the most powerful ever created, so working with magnets of high magnetic concentration as the N52 requires a valve specifically calibrated to the level of traction magnetic power of the magnet, is why so many people wanting to do crash magnet motors, since they do not know what a metering valve magnetically because they are unaware what the function.
Now comes the big question, so that the valves are calibrated? And another big question remains even more automatically how permutation magnetic valves calibrated?
Well although this is not a thing of another world and it does not require scientists from NASA to develop or build, if a change is to have a bit of talent and patience to do it calmly and well done.
1. We have to do a little work and research laboratory to calibrate our magnetic valves trade with the magnets that we use.
2. Why do we have to calibrate? Quite simply we have to make attracting between 2 magnets is neutralized such a level that the 2 magnets can stick to the valves gently without repelling but at the point where the sheet metal valve nor the appeals powerfully .
3. Or is this important and vital feature is going to give the sheet thickness of the valve THAT SIMPLE.
4. We need to make two magnets repelling powerfully as neodymium can win but gently being the one side and the other opposite the valve plate side.
5. Why is this? Well this is because when running magnets in the motor rotating reach the point of coping and maximum closeness;
1 First you should not repel because otherwise there could zoom in and logically could not turn, this would happen if the sheets were too thin or thinner than necessary, I want to clarify that although super specialty metals are used as those of mumetal have to calibrate them equally.
2nd second if the thickness of the lamina of the valve is higher than the average required then the attraction between the magnet and the valve will be too strong, considering that are two magnets one on each side, for then no magnets or the valve will move your site or pulled with a yoke of oxen or a tractor and much less if these magnets are neodymium ..
3rd By this I mean to imply another third factor derived from the balance of these two right through properly calibrated magnets metal valve! THIS IS; the valve should move down when the two magnets are facing each other, if calibrated properly, repelling both also neutralizes the attraction of the magnet towards the lamina of the valve and it can be pulled down with the force of small spring that active which must be strong enough to do it.
I notice that the valve will not move from his place or with a hammer while the two magnets are not faced with each other, to neutralize the attraction of the magnet valve when alone.
6. GOOD WELL UNDERSTOOD THE ABOVE ITEM spent the next issue of how we calibrate the valves.
EYE WANT TO WARN OF DANGER THAT ARE HUGE neodymium magnets
Especially for children and for people of any age, since they must be handled with extreme caution and extreme caution, because they are so powerful that any awkwardness can become painful and tragic accident that may invalidate day in various ways boththat can become so severe magnitude the damage caused injury, which can cause the affected worker can not work for months or even years in some cases the person may lose fingers or a limb or even life.
I want to emphasize that working with neodymium magnets is not a game, if by chance two magnets of this nature closely left, the attraction between them is as violent as a hammer and then as a press together, if by chance you have a tip of your body amid these can break you bones without any difficulty or serious injuries and at least one pinch acme brand.
And much care if the head or face in the midst of these enamored with fury that could easily kill a person or make severe facial injuries.
Even away from us there is great danger if they come to unite with such violence, since whatever is in its path can fly off like a bullet toward us and if there is glass or crystal, can become grenade splinters also neodymium magnets with an impact of the same attraction can break and shatter as neodymium is as ferrite magnets practically a metal crystallized more closely akin to the nature of ceramics, metal, is itself almost metallic glass out, because oxidized with immense rapidity, since the neodymium is an element that is highly reactive with water and in the presence of oxygen.
If somehow he gets to descarapelar somewhere, you should paint it with thick enamel to avoid damaging you quickly and also that the neodymium oxide or he is an ecological pollutant it emits toxic gases. So it is good to keep in good condition or coat them with lacquers or enamels bonus. After you have installed on your workstation.
Well Continuing with our theme of great interest and with the utmost caution, I recommend using thick gloves when working with these magnets and protective eyewear case, notice that magnets older neodymium 1 square centimeter longer pose a danger, if not handled with caution, so I suggest that children who are interested in this project are helped by older and not leave them for any reason in their hands, much less in their possession when they are alone.
GOOD ITEM IS HOW WE WILL ADJUST VALVES MAGNETIC trade;
First thing is to realize that there must be a measurable distance between the valve and not less than 3 mm magnets per side from the nearest points if using flat magnets, and if it is more uniform semicurvos the equidistanciacion in this case shall be given a similar curvature to the valves.
For adjusting our laboratory we have two separators compact and hard plastic or cardboard with 3 mm thickness for each of these simulating the distance between them will prevail in the engine, they can be large enough to handle the magnets without danger of fence to put together violently by accident I suggest to fix them separator with plastic tape auto adherible for safety from sticking, and how big should be beating a plastic container or expanded polystyrene by the back of at least 4 inches thickness.
Well with this ready proceed to the next step, maybe we will have to draw with pen position of the magnets for the front so you know exactly where to put in place adequate sheet metal that will become metering valve, I suggest use thin sheets 22 to 28 gauge galvanized, which can be easily cut with scissors to simple metal without much effort, the size of the valves must be 3 millimeters above and below as the inlet side is long and the output should be an inch more, well now taking up to 15 sheets derechitas well cut properly without folds, with its well hammered and sanded or smoothed corners to avoid problems of coupling between them and does not restrict its operation. They should also be pre-drilled into place to screw the valve lift.
At the same time should have lists of good paper sheets sized valves with a similar thickness of the thicker bond paper, and which will sandwiched between the metal sheets so that the sheets can not touch each other with when fence to be bonded and fixed.
Well having all these preparations proceed ready so if you build the metering valve.
Take one of the magnets that we have secured to the base 3 mm face up on a wooden table glass or plastic, not metal eye.
About this put 2 or 3 boards with their proper release papers, then we place the next magnet on top and let's go trying to achieve neutralize the repulsion, and to the extent that there is a mild and gentle attraction when we have achieved this, then proceed to hit the sheets the paper with silicone rubber to glass before and immediately irlas sticking together.
When we go butting must press them with something and leave so much weight from one day to another.
Dry and we must make 2 intermediate drilling and remacharlas but first must be tested before riveted by whether they have perhaps had an unfavorable variance.
From Lacking effective as they are added some more extras sheets, then retested and finely whether to proceed to perforate and remacharlas.
Well this is all about.
I do not give motor size for each who manufactures the size you want, but watching and observing what I present in these pictures you can take ideas very approximate to develop them.
ANNEXES IMPROVEMENT
Here I expose an engine with 4 magnets in parallel in unison, but who wants sequence could create 4 or 6 or 7 etc.
In sequence means that the valves are triggered sequentially one after the other instead of firing all at the same time.
Magnets for larger diameters may be used for long and narrow their trade valves have the shortest possible route, this would improve their active work.
It also can create multiple rotors coupled engines for more power, or rotors of one very long piece with multiple magnets in parallel pairs shot. So being shot five unison and then 5 and finally another 5 pairs in parallel in a single turn of the rotor.
8
8th YEAR
STUDY OF TURBINES GRAVITATIONAL
BY fLOTATION
Let us now WATER HYDRAULIC MOTORS GRAVITY
Here all calculations to achieve them and study them properly,
Although I gotten down more to flotation requiring less expenses and can obtain higher powers as I have explained in other videos from youtube, but however it is important to know the principles that operates the turbine by gravity, for which will this practice way to experience the issue of sELF engines have called AUTON.
The following images are Reviews Of Gravity Engines For Flotation
MOTOR FLOAT # 1
• Whoever can do this gravitational engine running by laws of gravity, as a thesis for school, hobby, scientific development or commercial interests. As machine to move what you want, it certainly has little speed, but can obtain any amount of power, can be built to any size and calculated with high accuracy to move generators low speed, mills, real boats or toys, he emphasized can generate great power and strength to what is desired. Pumps up water, cable cars motors to move, I transport of materials by wires and even trains railways. It can also be designed in many ways, here vertically in the drawing that I present, but also can be done horizontally in series, if so desired or required moving model.
• MATERIALS
• 1 A tractor chain long enough to make the journey, can be plastic, aluminum or stainless steel if it is to work hard. The chain links can be as used in the doors, or string of machines such as drives of motorcycles and bicycles, but this should be of stainless steel. Floats must be screwed or adapted conveniently to the length of the chain. Although it is more appropriate to manufacture a chain as follows floats, like the pulleys.
• 2 For glass or transparent plastic containers for more Didaxis and see this wonderful engine size is calculated can be used.
• 3rd Pulleys guide and traction are 5 in total, 4 of which could be rubber with a guide, to prevent the chain derailed and one with teeth, which give traction power, this can be done in stainless steel if you to move something strong, or plastic or aluminum if it is for display models, although it would be appropriate to manufacture a pulley where the floats are part of the gear as shown in the drawing.
• EXPLANATION
• 1 The chain formed by the floating spheres enter through an open tube that turns to a siphon 2nd 3rd air which goes down to the water where 4th flips up, pulled strongly by the action of floating spheres, this engine system as simple gravity technology can solve lots of problems for the daily life of human societies duly applied.
• CALCULATIONS
• Each liter of air can lift a kilo of weight in water.
• Now if the water is mesclada conventional salt may obtain a value of 1,025 kilos per liter of air.
• In our drawing we have 12 fields within the water while 20 liters were each power would be 240 kilos. Which if multiplied by the radius of the pulley or gear chain axis, could be driving a power of 3-10 times the ascension of 240 liters of air.
• If they were barrels of 200 liters of 2400 kilos of plastic would obtain torque that could be multiplied by 3 to 10 times, or could talk about 24 tons of torque.
• If it is done in containers of 500 liters as we could have 60 tons of torque and so on.
• As I have always said solving the energy problem is a problem of fools, has reached the moon, Mars, etc, etc, quantum equations are decoded electronics to come to indecipherable levels and have not solved the basic problems and elementary of earthly life.
• Well here I give you this simple knowledge I hope you manufactured by billions around the globe, and be a lesson to unbelievers Mongolian poor.
STUDY OF GRAVITY WATER TURBINES FOR FALL GRAVITORY
Aclaro que por razones de la presión atmosférica los ductos de las turbinas realizadas con tubos, construidas con diámetros menores a 3 pulgadas van a afrontar grandes dificultades de fluidez, quiero recalcar que extrayendo el aire o sea al vació funcionan a las mil maravillas en cualquier diámetro ya sean menores a 3 pulgadas.
A CONTINUACION TURBINAS DUPLEX LAMINADAS PLANAS QUE PODRIAN MEJORARSE SU DISEÑO PARA MANEJAR MAYORES VOLUMENES DE AGUA, PERO AQUÍ SOLO DOY UNA IMAGEN COMO IDEA BASICA Y ELEMENTAL.
AUNQUE SI ESTAN DEBIDAMENTE Y CORRECTAMENTE ACOTADAS SUS INCLINACIONES Y ANGULOS CORRECTAMENTE.
9
9th exercise
TURBINE infallible BALANCED BRIDGE
THIS WORKS WITH WATER TURBINE A THOUSAND WONDERS
For those who want to build a true perennial turbine action.
No failures or setbacks of any kind.
This is the perfect machine HIGH TORQUE POWER FOR MANY PRACTICAL APPLICATIONS OF ROUGH AND HARD WORK.
Let me be clear that this machine is not for speed but for low revolution but powerful.
To my point of view is very simple this mostly flat thrifty suffering and ecological damage to ECOBIOS because it can save us continue destroying the planet and altering all its climates, which can generate technology and inexpensive, if followed in this rate ecological destruction that nature reacts violently with huge cataclysms, and an end to predatory bacteria that are sick.
The proliferation of motors and generators perpetual motion are and shall be authorized by a government world law as the only legal systems for manufacturing, under the AUTON law of conservation of energy which is the preservation of the environment, conservation of matter and conservation of all that has life.
Since energy conservation is the preservation of all that exists, because obviously everything is energy and this is the fundamental law of ecology whose marrow is the AUTON law.
10
FATHER AND MOTHER OF PERPETUAL ENGINES ARE AND WILL FOREVER FOR THE FUTURE;
(((((((--MOTORES HIDRAULICOS--)))))))
UNDERSTAND WHY?
! KNOW WELL WITH A CAT THAT YOU CAN CLIMB A GANDOLA OF 50 TONS WITH A SINGLE MANO¡
WHAT DOES THIS MEAN?
AS CLEARLY THAT ANY INTELLIGENT RETRO CAN FEED MECHANISM
"O 3O KILOS WITH WHETHER you lift 50 TONS"
DO YOU DAS ACCOUNT?
WHAT IS THE FACTOR OF POWER GAIN?
IN THE HYDRAULIC OR IS INFINITE SEA HAS NO LIMITS
ALL OTHER RANKS IN ELECTRICAL MOTORS, ELECTRONIC, CHEMICAL, MECHANICAL OR FUELS ARE LIMITED IN FULL POWER, WEIGHT, MATERIALS, ETC ETC ETC ELECTRONIC COMPLICATIONS AND MANY OTHER FACTORS.
CHANGING THE HYDRAULIC HAVE THOUSANDS OF ADVANTAGES OVER ALL OTHER RANKS OF SCIENCE OR PERFORMANCE LEVELS OF MATTER
ALTHOUGH I AM FULLY AWARE THAT THE ELECTRONIC AND FURTHER THE HUMAN MIND ALL LEVELS MAY overflowing UNIMAGINABLE POWER AND BEYOND ALL LIMITS OF THE MATERIAL.
HOW TO TRAVEL TO ANY POINT OF THE UNIVERSE WITH JUST THINK.
THIS WHAT I noted I PERSONALLY ENGAGED IN A HIGH INSTANCE OF PRACTICE YOGA IN A MONASTERY OF TIBET IN A TIME OF MY LIFE THAT ME avoque UNDERSTAND WHY THE UNIVERSE, AFTER A SPECIAL yogic PRACTICE OF TELE TRANSPORTATION
(It should be noted TO KNOW PERFECTLY ASTRONOMY ORDER TO ACHIEVE THESE PRACTICES)
ME ACHIEVE teleport PHYSICALLY AND WAS IN A PLANET OF A CLUSTER WITH HUMANITY GALACTICO not age YOUNGER AND JUST HAD THE FOUR THOUSAND FIVE HUNDRED MILLION YEARS, NO ONE SEEMED TO HAVE MORE THAN 25 YEARS, THERE VIVI 3 MONTHS AND STUDY WITH THEM MANY SCIENCES uNKNOWN ON THIS EARTH, TO THE BEST OF HUMANITY WILL TAKE A MILLION YEARS CAN GET TO THE RHYTHM AND STEP CONPRENDERLAS CARRYING.
GOOD ITEM continue with our ATTEMPTING TO REMOVE THIS CAVERNICOLA THIS WORLD HERITAGE IN DIAPERS WITH YOUR FUEL ARCHAIC SCIENCE PREHISTORIC REX DINOSAUR! TODAVIA¡
HUNDREDS OF LATER ENGINES DARE YOU CAN DO WITH A HYDRAULIC JACK OF ANY CAR FROM THE MOST SIMPLE AND EASY TO THE MOST SOPHISTICATED AND POWERFUL
I HAVE NOT GIVEN THE PERPETUAL EXERCISES FOR HYDRAULIC ENGINE THAT ALMOST NOBODY IS INVESTIGATED BY SCIENCE AND LESS OF PERPETUATE feeding AUTO MOTION TO WHAT I WILL CALL SIMPLEMENTERETROALIMENTACION
Well despite all that we have seen me emphasize that so far there are no mechanisms to build perpetual and perennial engines free energy, which can overcome the power capacity and higher speed performance hydraulic drive motors, these are the most powerful , fast lightweight and compact powerful that can be produced practically can design any parameter that is in addition to all these great qualities you want, they can work day and night for ever and ever wear all their power, because they are completely airtight locked in friction oil, besides all this, are the most environmentally friendly engines of the world first because absolutely nothing contaminate produce no noise or vibration of any kind, do not bounce off or anything, and most importantly absolutely consume any energy.
NO MORE GOOD I WILL SHOW THEM ONE OF MY MOST INTERESTING ONE TRUE PERPETUAL ENGINES ENGINE "RUNNING WITH OIL,
It is REALLY THAT FEEDBACK TURBINE WITH YOUR OWN MONEY.
THIS ENGINE IS AN EDUCATIONAL MODEL ORDER TO UNDERSTAND THE MECHANISMS.
BUT I HAVE MANY OTHERS WHO ARE OF HIGH TECHNOLOGY AND EXTREMELY COMPACT SO I WILL GET THE MOST SIMPLE TO UNDERSTAND THE BASIC PRINCIPLES OF OPERATION THIS WHAT HE BAPTIZED WITH THE NAME OF THE TECNUS MAGNUS # 1
In the not too distant future in which the world is culturice and all world governments totally ecological systems become that at some point have to wake up and realize that we must do things properly as well and which must do then these engines have their maximum height will be inherited in families from father to son for generations as an important part of the family legacy.
The hydraulic motors are the pioneers of perpetual motion engines because they can develop a high power and speed without limits and most importantly can be created very small and compact sizes.
I stress that superhidraulico engines are the parents of the perpetuity of motion and energy obtaining ample enough to move him whatever speed you want.
It should be borne in mind that all the technological future of the growing green industry shall endeavor to this simple engine that requires no power or fuel, which is organic and will save the planet, based on the science of technology Power industry is that the future will unfold, million vehicles, aircraft, ships will be built. etc ... And all the productivity will be based on it.
Hydraulic motors are really the most sophisticated of perpetual dealtísimo performance engines power and speed, which can be constructed very compact, lightweight and strong sizes is why we must redirect our attention to the wonderful science of hydraulics, which is the largest industrial impact, and which will in the future of an impact on the economy without limits, this will be very soon spread across the globe with supreme speed and cut in many shapes and forms aventajándose far above all the electrical system and its complex networks as tiny motors could move around inside the home, blenders, grinders, washing machines, refrigerators, drills, saws without any cables and most importantly an insignificant little engine like a fridge identical sealed oil completely silent can generate DC and AC current with a power of 20 kwa, which for more than enough house would be virtually assigned to use only one for lighting and electronic equipment, hydraulic AUTON this simple motor which requires no power or fuel , is the ecological salvation of the planet, this idea million cars, planes, boats were manufactured. etc ... and all will be moved to. The hydraulic be the science of the future and to establish a substantial impact on the ecology, and environmental preservation with wonderful repercussions for everyone. (the patent of this principle is universal as it is and will be for the good of humanity, remain critical mind banned for military use and actions against humanity, as it acted with the full force and weight of the law against those elucubren Machiavellian machines ethnoecological applying these principles) is so strange that man has deciphered very complex science, but has been stuck in the simplest things to solve as it would be to make autonomous driving a motor that does not require anything of polluting and destructive energies. it seems that the simple things are the hardest to understand, comprehend and master because the human mind is very complex and tangled loves more than disentanglements,
A fist-sized one hand slightly larger engine can move a big bike over 300 miles per hour in less than a minute.
An engine that is not even out could easily be in any tube of a bicycle and take to go around the world without stopping.
The hydraulic motors could be one of the four wheels of a car and even though I will review an expert mechanic did not find the explanation of how it works and how the car moves.
An engine half a briefcase could move a fully loaded plane around the world and take several turns without stopping until supplies are exhausted passengers.
Only generates hydraulic exorbitant powers with very low action efforts so translated into rotary gear mechanisms can achieve super wonderful engines ever imagined by any human being. But the super shocking is that it requires no external impulse that generates the self itself that is self cater themselves.
It is in this technology !!!!! that all mankind should focus valid only source to move all tecnológico¡¡¡¡¡¡¡ development.
Therefore I invite and urge the cerebral cortex of the planet or be geniuses of the world, and all who have enormous industrial production to seriously focus on the emphatic and assiduous mind hydraulic infrastructure development.
The most important thing today is the economy and the technology first save raw material, the second time the operator no longer requires repairs, third party does not pollute the world, these cutting-edge hydraulic motors could incorporate a small generator dc or ac to activate extras a machine, especially electronic sectors.
An engine of this kind of size 3 fingers could move anything within the home, or any machine from a mixer until a washing machine and fridge.
The electric current should become another tome factor polluting pollution that damages the visual landscaping in cities, and will be supplanted by hydropower as disharmonious not generate magnetic fields, which have harmful health effects.
The hydraulic motors do not burn high or low, and thus prevent the exploitation of copper.
But logically that the most important of all factors of the huge benefits of hydro is not pollute or we destroy nature more.
Many will wonder where the AUTON law of hydraulics is based?
Simple to understand how you could lift with one hand force of 50 tonnes or more weight? Only generates hydraulic exorbitant powers with very low action efforts so translated into rotary gear mechanisms can achieve super wonderful engines ever imagined by any human being.
It is in this technology HYDRAULIC all mankind, all geniuses, all industrial, throughout the economy, every government, every method of study should be directed mostly in this direction and is in this science where should focus , concentrate and valid only source arrogate to move all technological development.
Well here I will make known a simple hydraulic motor a bit cumbersome since I've created to exaggerate their parts and processes for more that everything works didactic way, but using enough technology could be compacted to less than a quarter the size of I am showing since there would be no tubes that would be appropriately integrated in the interceptors that are reinforcing their structure and could only distinguish the moving parts inside the open position visible connections.
I have developed a gearbox vanguard for these engines, which only comprise two parts that are supremely simple and straightforward whose qualities and virtues are above all hydraulic boxes of all vehicles in the world, which would give 3 kicks first because they are indestructible and do not require any changes between different gears because their changes are fully automatic infinite linear I imperceptible, equivalent to that had a thousand different sizes of gears and speeds, so changes are made by games ducteria flat leveling hydraulic pressures that a single adjustment can be varied in weight sensitivity if desired or necessary.
gears as the power of this simple engine torque is approximately 5000 horses, more than enough to push whatever speed you want.
The disc turbine can reach speeds of 90,000 rpm,
And most shocking part is that even turning a 5 rpm keeps 5000 horsepower without the slightest variation in power for speed.
I designed this engine with a maximum of 5000 hp, which is controlled by a safety valve which limits the operating pressure, and which is incorporated in the same key rate control.
I can vary it up to 25 000 hp which is the limit of the pump type that I used in the prototype we have built, but the strength calculation of the size of the gears and shafts and ducts that have managed not hold up and could crack and destroyed in the blink of an eye, in addition to the rolineras I have gotten higher strength, the type of roller does not exceed 120 tons of pressure and still 5000 hp is enough power for this little engine that only measures 50 inches by 50 inches on the outside. The turbine only measures 30 inches.
I want to clarify that this tiny motor I can carry a mack 32 wheels with 80 tons of weight without any difficulty and speed you want. Rather, I've had to implement a visual indicator limiting power sensor driver for not going to destroy the system of traction wheels gandola with excessive power satellites transfer unit.
Install this engine in a heavy-duty unit for 7 years until I got bored of seeing that there was nothing unusual, so more than proven I can recommend this energy system completely healthy and without fear or fears whatsoever if it will work or not .
In seven years of hard work this unit not spend a dime on fuel of any kind.
Logically only repair parts and wear parts such as wheel drive and several annexes.
Well giving terminate this booklet remains to say that the next DRAWING will declare free energy engine that only uses 2 springs which fit too well into a tube maybe less than 2 inches and can move a bike at 60 mph but the funny thing is that in addition does not exceed 5 kilos of weight.
And I think will be the engines of the future for bicycles. Or ultralight vehicles 2, 3 or 4 wheels in the not too distant future.
I do not give dimensions as the person who intends to build it get materials of different sizes, so everyone should design it depending on the materials you can find in your area of habitat.
I want to suggest to friends and colleagues that it is much easier to make these engines the magnet due to the high cost of them and hard to find on the market.
To make this engine you can find the materials in almost any city in hardware stores and spare parts for motorcycles and cars.
In my case I used 2 long springs of using dampers front of the bikes that are 40 inches and did so comprimieran up to 25 inches.
Use a gear ratio of 20-1 so that the screw gives 20 turns for every turn of the wheel of the bicycle to ultimately boost a lap and a half with which covers about 2, 5 meter drive then go 6 meters it takes to compress the spring to the screw, so in total cycle every 8 feet in repeats.
This is excellent for flat areas on steep climbs but you have to help a little with the legs, which could be solved if a screw with a faster pace which could give a boost every 2 or 3 meters is designed.
So I decided to do a flywheel with 15 kilos of perimeter weighting by filling a wheel motorcycle concrete thus obtained excellent results in a constant drive with a gearbox with cloche of a motorcycle engine for activation connection and off so that the rotor does not stop its rotation.
But because of the size of the engine I decided to do a tricycle tricycle which works like a charm.
9º EJERCICIO
MOTOR DE TORNILLO
I do not give dimensions as the person who intends to build it get materials of different sizes, so everyone should design it depending on the materials you can find in your area of habitat.
I want to suggest to friends and colleagues that it is much easier to make these engines the magnet due to the high cost of them and hard to find on the market.
To make this engine you can find the materials in almost any city in hardware stores and spare parts for motorcycles and cars.
In my case I used 2 long springs of using dampers front of the bikes that are 40 inches and did so comprimieran up to 25 inches.
Use a gear ratio of 20-1 so that the screw gives 20 turns for every turn of the wheel of the bicycle to ultimately boost a lap and a half with which covers about 2, 5 meter drive then go 6 meters it takes to compress the spring to the screw, so in total cycle every 8 feet in repeats.
This is excellent for flat areas on steep climbs but you have to help a little with the legs, which could be solved if a screw with a faster pace which could give a boost every 2 or 3 meters is designed.
So I decided to do a flywheel with 15 kilos of perimeter weighting by filling a wheel motorcycle concrete thus obtained excellent results in a constant drive with a gearbox with cloche of a motorcycle engine for activation connection and off so that the rotor does not stop its rotation.
But because of the size of the engine I decided to do a tricycle tricycle which works like a charm.
